Urgent.News

What's breaking now, across hundreds of outlets.

Tech

Your first ESP32 project should be something boring, and the boring ones are the ones I still use

Save the robots for later.

Your first ESP32 project should be something boring, and the boring ones are the ones I still use

If you're new to ESP32 boards and looking for your first project, start with something simple, like a room weather station, a plant monitor, or a motion detector. These projects are often the most useful and practical, despite their simplicity. For instance, I built a basic room weather station by connecting a temperature and humidity sensor to the ESP32 and sending readings over Wi-Fi to ThingSpeak, a free cloud dashboard.

It's a straightforward project that only requires an ESP32 board, a sensor, a few jumper wires, and a USB power supply. Building this setup teaches you the fundamentals of connecting sensors, uploading code, configuring Wi-Fi, and communicating with an online service. Once you're comfortable with the basics, you can experiment with different sensors or add more functionality.

Similarly, I created a smart plant monitor using a capacitive soil moisture sensor, which measures the moisture level in the soil and sends an email to me when it drops below a certain threshold. This project uses a capacitive sensor, which is better suited for long-term use than cheaper resistive moisture sensors. Finally, I set up a motion-activated intruder alert by connecting a basic PIR motion sensor to an ESP32 and configuring it to send a Wi-Fi alert whenever movement is detected.

While these projects may seem unexciting, they're incredibly useful and can serve you well for years.

Rewritten by urgent.news; may contain errors — check the original.

Source: xda-developers.com

Read the original at xda-developers.com →

Report a problem with this story

More in Tech

More from Sunday 22 November →