Urgent.News

What's breaking now, across hundreds of outlets.

Tech

Here's how to properly test your USB speed

Your USB ports and devices are all rated for certain speeds, but how do you know everything's performing as it should? It's actually not that hard.

Here's how to properly test your USB speed

Understanding USB speeds is crucial when purchasing storage drives, hubs, and accessories. To test your USB speed, you can use open-source programs like CrystalDiskMark and AmorphousDiskMark for Windows and macOS. Connect a drive to the USB port and open the program, selecting the drive from the drop-down menu. This will initiate a sequential read and write test, providing an indication of the USB port's speed.

Windows users can also check if their connected device is running at the port's top supported speed using the Windows SDK and a tool called USBView. Access USBView by navigating to Program Files (x86) Windows Kits 10 Debuggers, then open the tool and select your storage device from the left pane. Look for a descriptor like "SuperSpeed" or "USB 3.2 Gen 2x2" in the Device Information header.

When testing a USB port, use a device (and cable) that meets or exceeds the port's capabilities to see its full potential. For USB hubs, connect to the fastest USB port available to eliminate the host computer as the bottleneck. USB ports may have colored shielding to indicate their speed, but these schemes are not universal. Consult your user manual or USBView to determine the exact version and transfer rate of each port.

Storage diagnostic tools typically display results in bytes per second, while the USB specification uses bits per second. Remember that data transfers rarely reach the theoretical maximum speed but should still exceed the previous USB version. USB 3.2 Gen 2 devices may not achieve 10 Gbps but should surpass the 5 Gbps threshold of USB 3.2 Gen 1. USB 4 comes in three speeds: 20 Gbps, 40 Gbps, and 80 Gbps, exclusive to the Type-C connector. USBView will show these names and speeds for each USB port.

Note that USB features backward compatibility, allowing devices to reach the top speeds allowed by their version on higher-capability ports. However, USB 4 does not require host devices to support 20 Gbps via USB 3.2 Gen 2x2; some devices may fall back to 10 Gbps. USB 4 shares the Type-C connector with Thunderbolt, with Thunderbolt 3 and 4 rated for 40 Gbps and 80 Gbps, respectively. Ensure you have cables that support the Thunderbolt standard you're using.

Rewritten by urgent.news; may contain errors — check the original.

Source: engadget.com

Read the original at engadget.com →

Report a problem with this story

More in Tech

More from Sunday 22 November →