My Monitor Was Cutting My Download Speed by 75%
A user owned a 2.5 gig symmetrical internet line, but experienced a mysterious drop in download speed to 600 Mbps when using a Studio Display XDR monitor. The user, who is familiar with their Internet Service Provider's prompt customer support, tried various troubleshooting steps with no success. The problem seemed to be tied to the monitor's USB Ethernet adapter, which was using a Realtek RTL8156B driver.
The adapter would drop Ethernet frames before the computer could process them, resulting in a loss of speed. The user discovered that enabling flow control on the adapter improved the download speed to around 2 Gbps. However, this introduced latency issues and was not a permanent solution. The user then connected to a Linux box and tested the adapter's performance with UDP traffic, discovering that dropped frames occurred when the adapter sent fewer than 168,000 frames per second.
The issue stemmed from the adapter's inability to keep up with the burst of data from USB 3 devices. The adapter's maximum speed is 2.5 Gbps, but USB 3 devices send packets in bursts of 4, whereas the SSD enclosure sends 16 packets. This discrepancy led to dropped packets and a significant reduction in speed. The user concluded that their USB-C Ethernet adapters were limited to 1 gig speeds, and only higher-speed adapters would reveal the full potential of the 2.5 gig internet line.
Rewritten by urgent.news; may contain errors — check the original.
Other reports of this story
- My Monitor Was Cutting My Download Speed by 75% blog.tymscar.com