Urgent.News

What's breaking now, across thousands of outlets.

Tech

Fire Alarm Standby Battery Sizing: The Calculation I Run Before Specifying a Panel Battery

By Chen Yu, ELV (extra-low-voltage) systems designer since 1998 I do not pick a fire-alarm battery from the panel brochure. The brochure tells me which block sizes the cabinet will accept. The size I need comes from the device list, the panel's own current, the standby and alarm durations the authority having jurisdiction has adopted, and a factor for a battery that is no longer new. Over 25+…

Fire-alarm standby battery sizing requires a methodical approach beyond just picking a block from a panel brochure. The battery specification hinges on the device list, panel current, adopted standby and alarm durations by the authority having jurisdiction, and a derating factor for battery aging. Experienced ELV and fire-alarm designer Chen Yu notes common errors, such as leaving out sounder alarm currents, treating the panel as if it draws no power, arbitrarily choosing a block size, and not accounting for battery end-of-life capacity.

Every device and the panel itself have standby and alarm currents. Standby current is what the system draws after a mains failure while in normal monitoring state, with detectors, panel CPU, display, loops, and normally-energized loads like electromagnetic door holders. Alarm current is the system draw during an alarm, covering sounders, beacons, voice-alarm amplifiers, detector alarm LEDs, and alarm relays.

Not all loads remain active during alarm; some, like door holders, draw current only in standby. Both standby and alarm currents contribute to the required amp-hour capacity, calculated using the formula: Ah_required = (I_standby * T_standby + I_alarm * T_alarm) * F. I_standby and I_alarm are the system totals in amperes, T_standby and T_alarm are the standby and alarm times in hours, and F is a derating factor, typically 1.25 to cover battery aging.

Standby and alarm times are specified in national installation codes, such as 24 hours of standby and 30 minutes in alarm. Other codes might prescribe different durations, like 8 hours standby and 30 minutes alarm in China. The amp-hour calculation involves multiplying standby and alarm currents by their respective durations, summing the results, and multiplying by the derating factor.

For example, on a 24 V addressable panel with 24 hours standby, 30 minutes alarm, and a derating factor of 1.25, a small office building requiring 40 addressable smoke detectors, heat detectors, manual call points, sounder-beacons, a loop isolator, and a door holder calculated to have 641.1 mA standby and 955.6 mA alarm results in a required battery capacity of 19.83 Ah. Using next standard VRLA battery sizes, a 26 Ah battery would be appropriate.

Written by urgent.news from Dev.to's reporting — not their text. Machine-written — may contain errors; check the original before relying on it.

Read the original at dev.to →

More in Tech

How to Check Whether an SVG Edit Introduced a Broken Reference

An SVG can contain one broken gradient reference before an edit and one after. It can also render exactly the same. To tell whether the edit introduced a new problem, compare the references…

  • Compare reference details to check for broken references after SVG edit.
  • Control file with original SVG serves as baseline for comparison.
  • Record unresolved references before and after edit to detect new issues.

Cybersecurity Industry Health Check 2026: the highlights

The verdict Healthy by dollars. Unhealthy by breadth. Cybersecurity startups raised $17.4 billion in the first three quarters of 2026. The money is still there.

  • Cybersecurity startups raised $17.4 billion in Q3 2026, highest quarterly total in years
  • Cyera secured $1.4 billion across three rounds and acquired Oasis Security for $1 billion
  • Industry shift towards platform-based security solutions with Cyera's AI agent focus

P5 - Permissions in OKE: the node has identity, and all its pods inherit it

"Kubernetes on OCI at the lowest cost" series — part 5. In part 4 we set up the cluster and node pools. Here's how what's running inside gets permissions on OCI.

  • Nodes in OKE cluster receive permissions via their instantaneous identity
  • Two types of identity in OCI: users with own keys and principal instance
  • Each pod inherits permissions based on applied policy upon creation

The week everything fell apart

There was a dayslong Outlook outage. A nationwide ground stop for only the second time in 25 years. Banks seemed to suddenly stop working. Even iCloud couldn't stay up and running.

A short glossary for a reusable prompt

Most prompts are written once, in a chat box, for one job. A reusable one has a few extra parts, and they have names. Here they are, six terms, with one prompt from the PromptAlo community library as…

  • Backup and Restore Policy defines the prompt's context and purpose
  • Variables are bracketed fields user fills each prompt use
  • Quality checklist ensures answer meets accuracy and reliability criteria

More from Friday 20 November →