6 3D prints that solved problems I didn't know I had in my home office

As I ventured beyond the realm of 3D printing as a casual hobby, I discovered its potential to solve unexpected issues in my home office. Six months ago, I acquired a sit-stand frame for my workstation table, only to encounter persistent challenges. Numerous printable models, freely accessible online, confirmed that I wasn't alone in my predicaments. These printable bits and bobs became an integral part of my experience, leading to six significant additions to my home office.

First, I replaced the clamping base of my IKEA work lamp with a 3D-printed adapter, converting a retired brake rotor into a more stable stand. The larger foot of the printer improved friction and distributed the cantilever load better, eliminating the constant shifting and cracks in the original plastic base. This modification has kept my lamp firmly in place, despite the significant weight increase.

Second, I added a missing diffuser to my IKEA Tertial work lamp. While the original lamp's concentric circles diffuser was adjustable, my design used white PLA to diffuse the light adequately without the need for adjustment. The dimmable smart bulb I used seamlessly integrated with my smart home controls and voice assistants, compensating for the lack of adjustment in the design.

Third, I created a wrist rest to alleviate discomfort from my mechanical keyboard. Initially, I crafted a simple wooden plank, but eventually transitioned to a more ergonomic design inspired by the DeltaHub Carpio. My current version features a lower profile and a honeycomb pattern for better ventilation, printed in glow-in-the-dark PLA for added convenience.

Fourth, I tackled the cable clutter in my workstation. Using 3D-printed cable drag chains and server cable rails, I tuck excess lengths and run them down to my mid-tower on the floor. To manage daily-use charging cables and longer cords, I printed cable managers in PLA and TPU, securing them to the desk's edge with 3M VHB tape.

Lastly, I designed a universal phone stand to provide an optimal camera angle without the webcam glare. The stand, designed to accommodate various monitor thicknesses and bezel sizes, features adjustable bolts with wing nuts that can be tightened by hand, providing the perfect balance for my screen setup.