A $7 Raspberry Pi Pico 2 W and a USB cable are all you need for these 4 projects
Small board with surprisingly big possibilities.
For less than $10, you can create four useful projects with the Raspberry Pi Pico 2 W microcontroller. Its built-in Wi-Fi and Bluetooth 5.2 allow it to function without extra hardware. A USB cable powers and programs the board. MicroPython's network module can scan for nearby wireless networks, displaying SSID, BSSID, signal strength, channel, and security type.
This creates a basic Wi-Fi site survey tool. The Pico can connect to your existing network, showing nearby access points on a web page. Powering it with a USB bank, you can compare signal strengths in different rooms. It can detect 2.4GHz networks, though it can't identify 5GHz ones. The same board can scan for Bluetooth Low Energy advertisements, displaying each device's address, name, RSSI, and services.
However, RSSI readings won't be accurate due to factors like walls, people, and tag orientation. It's better to use it for in-range or out-of-range detection. The Pico can also function as a simple MQTT viewer, showing incoming messages from subscribed topics on a web page. While these projects require minimal hardware, they demonstrate the Pico's capabilities using MicroPython firmware.
Written by urgent.news from XDA Developers's reporting — not their text. Machine-written — may contain errors; check the original before relying on it.
This story
This is one outlet's version. Read the fullest account.