Urgent.News

What's breaking now, across thousands of outlets.

Tech

How to Install iPerf3 on Windows

Learning how to install iPerf3 on Windows allows you to test network performance, measure internet speeds between devices, and identify possible connection problems. iPerf3 is a network testing tool used by IT professionals, network administrators, and students to measure bandwidth, throughput, and data transfer performance. You can install and run iPerf3 on a Windows 10 [...] The post How to…

To install iPerf3 on a Windows operating system, first ensure your laptop meets the necessary system requirements. Your computer must run Windows 10 or Windows 11, have administrator privileges, an active internet connection, sufficient storage space, and a compatible iPerf3 Windows build. Search for a trusted iPerf3 Windows build, preferably a 64-bit version, and download the ZIP file to your Downloads folder.

Extract the contents of the ZIP file by right-clicking the file in your Downloads folder and selecting "Extract All." Choose a permanent destination folder for the iPerf3 program, such as creating a new folder called iPerf3 on your C drive, and move the extracted folder there. Launch the Command Prompt by pressing Windows + R, typing "cmd" and pressing Enter.

Change the current directory in the Command Prompt to the iPerf3 folder by typing "cd C:\iPerf3" and pressing Enter. Verify the iPerf3 installation by running "iperf3.exe –version" in the Command Prompt. If the version information appears, the program is ready for use. To allow running iPerf3 from any Command Prompt location, add it to the Windows PATH: open the Windows Start menu, search for "Environment Variables," select "Edit the system environment variables," locate "Path" under "System Variables," click "Edit," click "New," enter "C:\iPerf3" and click "OK."

Close and reopen the Command Prompt to use the iPerf3 command globally. Finally, test network performance with iPerf3 by setting up two devices with iPerf3 installed. On one device, run "iperf3 -s" to start the server, and on the other device, run "iperf3 -c SERVER_IP_ADDRESS" with the appropriate server IP address. This will measure the network throughput between the two devices.

Written by urgent.news from KahawaTungu's reporting — not their text. Machine-written — may contain errors; check the original before relying on it.

This story

This is one outlet's version. Read the fullest account.

Every outlet that reported this, and when →

Read the original at kahawatungu.com →

More in Tech

More from Tuesday 17 November →