FAA pauses tech upgrade linked to nationwide ground stop
The FAA is halting the installation of new routers following Friday's nearly five-hour nationwide ground stop , the agency confirmed Tuesday. Why it matters: The technology rollout is suspected to be connected to massive travel disruptions that continued through the weekend, inconveniencing travelers across the country. Editor's note: This is a breaking news story and will be updated.
On Friday, L3Harris Technologies was performing routine work at an FAA radio site in El Dorado, Arkansas. They were upgrading a communications line from outdated copper wire to modern fiber-optic cable. Shortly after installing a new router, the device began transmitting an excessive amount of data, causing disruptions to communications at 17 out of 22 en route centers that manage high-altitude traffic.
At 3:36 p.m. Eastern time, with around 3,500 flights in the air, the FAA ordered a nationwide ground stop, suspending all departures for over four hours until 8:15 p.m. Airlines canceled more than 5,000 flights on Saturday and an additional 1,500 on Sunday as they reorganized crews and aircraft.
The source of the issue remains unclear, with Transportation Secretary Sean Duffy stating that investigators were still trying to determine whether the router was installed or configured incorrectly, or if the equipment itself was faulty. Hewlett Packard Enterprise, the owner of the router maker Juniper Networks, said their device functioned as intended.
However, the incident has highlighted weaknesses within the FAA's network, which has been struggling with outages for years. These include an aging contractor that has run the network since 2002, an integrator rated as a financial risk by the FAA's own staff, a technician workforce that is understaffed, and a $12.5 billion overhaul that has been rushed ahead of schedule without a master plan.
Despite these concerns, there is no evidence yet that any of these factors directly caused the recent failure. Critics, however, see Friday's chaos as the realization of warnings from years past. Former Transportation Department inspector general Mary Schiavo told NPR that this type of failure has happened before. The FAA's aging network of copper and fiber, which carries air traffic communications across roughly 4,400 facilities, still relies on outdated technology.
Some older equipment requires replacement parts that are difficult to obtain, and in 2023, an FAA-commissioned panel warned that the condition of the agency's facilities and equipment was "elevating system risk to unsustainable levels."
The FAA is currently speeding up its overhaul of the system, called BNATCS, with a $12.5 billion investment aimed at modernizing the telecom network by the end of 2028, 21 months ahead of the previous target of September 2030. However, auditors have noted that the agency is moving too quickly without proper coordination, leading to potential disruptions and jeopardizing the aggressive deployment schedule.
Written by urgent.news from Fast Company's reporting — not their text. Machine-written — may contain errors; check the original before relying on it.
This story
This is one outlet's version. Read the fullest account.
- The FAA’s ground stop has a simple culprit. Its causes may not fastcompany.com
- The FAA ground stop stranded me at the airport with 3 kids until 4 a.m. We're delayed 3 days and facing thousands in costs. businessinsider.com
- What we know about what caused the FAA's nationwide ground stop axios.com
- FAA is halting Juniper router installations after nationwide ground stop qz.com