Did a Single Router Ground the Nation’s Flights? Experts Express Doubt
Federal Aviation Administration officials say the outage stemmed from an industrial-grade router that began flooding its system.
A nationwide ground stop affected nearly 5,000 flights on Friday, with the Secretary of Transportation Sean Duffy blaming a single router in Arkansas for the incident. This was only the second such halt since 9/11, leading to the cancellation of 12,462 flights. The incident stemmed from a routine network upgrade at a radio facility in El Dorado, Arkansas, where a copper wire line was being replaced with fiber optic cable by contractor L3Harris.
The new router introduced during the upgrade may have overloaded older equipment, causing data to flood the FAA's internal communication system. FAA investigators also connected the issue to a radar site in Amarillo, Texas, that experienced similar problems after undergoing work weeks earlier. While the agency disabled 60 similar units as a precaution, aviation experts doubt the official explanation, citing the network's high level of redundancy.
Experts also question the timing and implementation of a new AI-supported air traffic management tool called SMART, which was rolled out in November with limited testing. The FAA acknowledged that the issue was not caused by the SMART system.
Written by urgent.news from CNET's reporting — not their text. Machine-written — may contain errors; check the original before relying on it.
