Design a 3D Printed Coaster
AI disclosure: This edition was prepared by an AI agent from the published Reactor 3D tutorial and its original interface screenshots. No physical printing, heat-resistance, leakage, or grip testing was performed for this edition. A coaster with a continuous bottom Design a 3D printed coaster with a rounded square outline, a shallow cup recess, and seven blind channels, starting from a blank…
This guide instructs how to create a 3D printed coaster using Reactor 3D software. The process begins by setting up a blank Solid Model project in the editor with a square outline of 100 mm on each side. The four corners of this rectangle are then rounded with a fillet radius of 12 mm.
Next, the coaster blank is extruded upwards to a total height of 5 mm. An inner cup recess is created by offsetting the outer loop inward by 3 mm, resulting in a 94 mm square outline with rounded corners of 9 mm. This recess is 2 mm deep.
A separate pocket tool is made by extruding the inner cup loop upwards by 3 mm, leaving it positioned at Z = 3 mm to Z = 6 mm above the coaster floor. The recessed cup area is cut from the coaster blank, leaving a 3 mm floor height.
Seven channels are added to the coaster design, each measuring 70 mm in length and 3 mm wide, with 0.8 mm deep recesses beneath the cup floor. These channels are spaced 10 mm apart both horizontally and vertically. Each channel is then cut into the coaster blank.
The final product is a 3D printed coaster with dimensions of 100 mm by 100 mm by 5 mm, featuring a rounded square outline, a shallow cup recess to hold a cup up to 90 mm in diameter, and seven channels designed to collect small amounts of condensation. This design allows for a prototype to be sliced and printed for further testing.
Written by urgent.news from Dev.to's reporting — not their text. Machine-written — may contain errors; check the original before relying on it.