Connecting an ESP32 to AWS IoT Core step by step
Publicado originalmente en iot.gripe , como parte 3 de la serie "Domótica con ESP32 y AWS desde cero". Conectar un ESP32 a AWS IoT Core parece sencillo hasta que el dispositivo dice "publicado" y a AWS no llega nada. En esta guía conectamos, paso a paso, un ESP32 a AWS IoT Core por MQTT sobre TLS, con un certificado propio y una política de mínimo privilegio, y lo controlamos a través del Device…
A guide on connecting an ESP32 to AWS IoT Core using MQTT over TLS with a custom certificate and minimum privilege policy has been published. The guide uses an ESP32-S3 Super Mini board and Arduino IDE with the ESP32 core installed, and involves creating a "Thing" and its certificate in AWS IoT Core, setting up a policy with limited permissions, and configuring the ESP32 to connect to AWS IoT Core.
The setup allows the ESP32 to control an LED based on changes made in the cloud and report its actual state back. The guide provides step-by-step instructions and code snippets for the process.
Written by urgent.news from Dev.to's report — not a translation of it. Machine-written — may contain errors; check the original before relying on it.