{
  "id": 8251290,
  "title": "Prusa CORE One L+ review: More precise",
  "url": "https://urgent.news/2026/09/18/prusa-core-one-l-review-more-precise",
  "topic": "tech",
  "section": "Tech",
  "published": "2026-09-18T13:00:00.000Z",
  "source": {
    "name": "Tom's Hardware",
    "slug": "tom-s-hardware",
    "url": "https://www.tomshardware.com/3d-printing/prusa-core-one-l-plus-review"
  },
  "original_language": "en",
  "account": "The Prusa CORE One L+ is an upgraded version of the CORE One L and XL 3D printers, released in August 2026. The upgrade addresses nozzle wiping failures that were previously an issue, and adds a silicone brush for improved performance with higher-temperature filaments. The printer comes fully calibrated at the factory, with only about five minutes needed to start printing. It boasts a 300 x 300 x 330 mm build volume, direct drive extruder, and a color touch screen. The CORE One L+ is currently priced at $1,999 and is the best Cloud Free/Open Source 3D Printer reviewed so far.",
  "summary": "Prusa Research makes its large CORE One a tiny bit better in a very important way.",
  "key_points": [],
  "editors_take": null,
  "illustration": null,
  "coverage": {
    "outlets": 1,
    "also_reported_by": []
  },
  "ai_generated": true,
  "disclaimer": "Summaries, key points and the editor’s take are written by software from other outlets’ reporting and may contain errors — always check the linked original."
}