{
  "id": 21296371,
  "title": "How to safely clean your PC's GPU to avoid damaging it in the process",
  "url": "https://urgent.news/2026/11/22/how-to-safely-clean-your-pcs-gpu-to-avoid-damaging-it-in-the-process",
  "topic": "tech",
  "section": "Tech",
  "published": "2026-11-22T22:00:00.000Z",
  "source": {
    "name": "Engadget",
    "slug": "engadget",
    "url": "https://www.engadget.com/2319541/safely-clean-pc-gpu-avoid-damage/"
  },
  "original_language": "en",
  "account": "A graphics processing unit, or GPU, accumulates dust over time, which can affect its performance and longevity. Replacing a GPU is expensive, so it's wise to clean it regularly. Cleaning a GPU can seem daunting, but following this guide will help you do it safely. The first step is to properly power down your computer and open the case to access the internal components. For most cases, a Phillips head screwdriver is needed, but some may only require loosening thumbscrews. To prevent static electricity from damaging the components, using an anti-static wrist strap is recommended. Once the power is off, the next step is to remove the GPU. It's easier to do this by laying the case horizontally on a table. After safely removing the GPU, it can be cleaned using an air blower or compressed air, a microfiber cloth, and 90 percent isopropyl alcohol. When cleaning the fans, hold them in place with your hand to prevent them from spinning freely, which can damage the bearings. After cleaning the GPU, reinsert it into the PC following the same steps in reverse order. It's also a good idea to clean other components while the GPU is out. Reinserting the GPU into the fastest PCIe slot on the motherboard is important. Properly seating the PCIe power cables is crucial as well. If your GPU collects a lot of dust between cleanings, consider improving your PC's cooling setup. Ideally, a case with slightly positive air pressure will reduce the frequency of component cleanings. Additionally, repasting the GPU can be beneficial, but this goes beyond the scope of this guide. Typically, a GPU running between 60 and 80 degrees Celsius under full load is performing well. As always, individual factors can affect GPU thermals, so it's essential to monitor the specific build.",
  "summary": "Removing and cleaning a GPU can be intimidating, but it's actually pretty simple.",
  "key_points": [
    "GPUs accumulate dust over time, affecting performance and longevity",
    "Properly power down computer, use anti-static wrist strap when cleaning",
    "Reinsert GPU into fastest PCIe slot, monitor GPU temperature around 60-80°C"
  ],
  "editors_take": null,
  "illustration": null,
  "coverage": {
    "outlets": 1,
    "also_reported_by": []
  },
  "ai_generated": true,
  "disclaimer": "Summaries, key points and the editor’s take are written by software from other outlets’ reporting and may contain errors — always check the linked original."
}