{
  "id": 21145269,
  "title": "How to calibrate your 3D printer (and why you should)",
  "url": "https://urgent.news/2026/11/21/how-to-calibrate-your-3d-printer-and-why-you-should",
  "topic": "tech",
  "section": "Tech",
  "published": "2026-11-21T23:45:00.000Z",
  "source": {
    "name": "Engadget",
    "slug": "engadget",
    "url": "https://www.engadget.com/2310980/how-to-calibrate-3d-printer-why-should/"
  },
  "original_language": "en",
  "account": "Proper calibration of your 3D printer is essential for producing high-quality prints with minimal errors. A poorly calibrated printer can lead to adhesion issues, rough surfaces, and dimensional inaccuracies, wasting filament and time on failed prints. Calibration is especially important for older printers that require manual adjustments and newer models that may handle some checks automatically. After a move, belt adjustment, nozzle replacement, or mechanical maintenance, recalibration is recommended.\n\nThe calibration process commences with a mechanical inspection, cleaning, bed leveling, and Z-offset adjustments. A first-layer test is also performed to ensure proper adhesion. E-step calibration, also known as rotation-distance calibration in Klipper, is crucial for determining if the extruder is dispensing the correct amount of filament. This step should be followed by temperature tower calibration to fine-tune filament settings.\n\nBefore recalibration, ensure your printer is on a stable surface, free from loose belts or components. Clean the build plate as per the manufacturer's instructions. Many modern printers, like those from Bambu Lab, Creality, Prusa, and Anycubic, can automatically measure the bed and set the first-layer height. However, older models, such as the Elegoo Neptune 4 and certain Creality Ender series, require manual adjustment of leveling wheels.\n\nAfter leveling, a single-layer square test should be printed to check for gaps or raised ridges, indicating an incorrectly positioned nozzle. Manual Z-offset adjustments can be made if necessary. E-step calibration involves measuring filament, setting a known feed, and comparing the actual feed to make adjustments. It's crucial to verify calibration options in your slicer, such as Flow Dynamics and Flow Rate tests in Bambu Studio, Creality Print, or OrcaSlicer. PrusaSlicer also offers extrusion multiplier adjustments.\n\nRemember, even filaments of the same material can behave differently, so calibration may vary based on the filament used. Always consult your slicer's calibration tools, such as PrusaSlicer's extrusion multiplier adjustment. By following these calibration steps, you can significantly improve print quality and reduce waste.",
  "summary": "Your 3D printer might not need replacing just because its prints keep failing. A few calibration checks could solve the problem and improve print quality.",
  "key_points": [],
  "editors_take": null,
  "illustration": null,
  "coverage": {
    "outlets": 1,
    "also_reported_by": []
  },
  "ai_generated": true,
  "disclaimer": "Summaries, key points and the editor’s take are written by software from other outlets’ reporting and may contain errors — always check the linked original."
}