{
  "id": 21066020,
  "title": "Modder cools gaming laptop with a bounce house blower for a 35-degree drop",
  "url": "https://urgent.news/2026/11/21/modder-cools-gaming-laptop-with-a-bounce-house-blower-for-a-35-degree",
  "topic": "tech",
  "section": "Tech",
  "published": "2026-11-21T15:31:48.000Z",
  "source": {
    "name": "Tom's Hardware",
    "slug": "tom-s-hardware",
    "url": "https://www.tomshardware.com/pc-components/air-cooling/laptop-cooled-by-bounce-house-blower-gets-35-degree-drop-in-temperatures-modder-compares-laptop-cooler-with-increasingly-powerful-fan-setups"
  },
  "original_language": "en",
  "account": "Experimental PC modder Trash Bench conducted a series of tests on laptop coolers to find the most effective cooling solution. After testing various setups, Trash Bench opted for a bounce house blower fan, which cooled an i7-10750H and RTX 2070 MaxQ laptop with a 90W power limit from 84 degrees Celsius to 48.8 degrees Celsius, improving gaming performance from 47 FPS to 56 FPS.\n\nTrash Bench was approached to review a laptop cooling stand, but declined, proposing instead a video where he would test his own designs to see if he could beat existing coolers. The Llano V12 cooling fan, sent to Trash Bench, managed to bring GPU temperatures down to 58.3 degrees Celsius, a 27-degree drop from the stock 84 degrees Celsius, while improving gaming performance by 19.4%.\n\nTrash Bench's first attempt to improve upon the Llano V12 involved using a single Noctua NF-A20 200mm fan with a 3D-printed duct and foam seal. Although the fan cooled the GPU to an impressive 66.3 degrees Celsius, it still lagged behind the Llano V12. Trash Bench's second attempt used six Arctic P12 fans at full speed, managing to beat the Llano V12 by only 0.9 degrees Celsius at medium settings. However, it fell short of the Llano V12 when pushed to 100% power.\n\nHis third attempt involved two 4000 RPM server fans, which were louder but ultimately succeeded in beating the Llano V12 by a margin of 2.6 degrees Celsius. Trash Bench took the idea a step further by using a bounce house blower fan, taking advantage of its larger foam gaskets and 3D-printing an interface to fit a flexible duct. The bounce house blower produced an average GPU temperature of 48.8 degrees Celsius, showing very little performance gain over the other tested coolers. Despite the temperatures, Trash Bench noted that lower temperatures eventually reach diminishing returns, as new bottlenecks emerge.",
  "summary": "A PC cooling enthusiast attached a bounce house blower to the bottom of his laptop, bringing temperatures below 50 degrees Celsius.",
  "key_points": [
    "Trash Bench tests various laptop cooling solutions",
    "Bounce house blower fan cools GPU to 48.8°C",
    "Performance improves from 47 FPS to 56 FPS"
  ],
  "editors_take": null,
  "illustration": null,
  "coverage": {
    "outlets": 1,
    "also_reported_by": []
  },
  "ai_generated": true,
  "disclaimer": "Summaries, key points and the editor’s take are written by software from other outlets’ reporting and may contain errors — always check the linked original."
}