{
  "id": 20400566,
  "title": "Why Do Wireless Modules Suffer Communication Latency? Common Causes and Optimization Strategies",
  "url": "https://urgent.news/2026/11/17/why-do-wireless-modules-suffer-communication-latency-common-causes",
  "topic": "tech",
  "section": "Tech",
  "published": "2026-11-17T07:51:21.000Z",
  "source": {
    "name": "Dev.to",
    "slug": "dev-to",
    "url": "https://dev.to/jamesliu/why-do-wireless-modules-suffer-communication-latency-common-causes-and-optimization-strategies-5627"
  },
  "original_language": "en",
  "account": "Wired communication systems often experience delayed data transmission in industrial automation, security alarm and remote telemetry projects. Wireless transparent-transmission modules, such as EBYTE's E22 series based on Semtech SX1262/SX1268 architecture, contain multiple buffering stages and protocol verification which contribute to communication latency. This article analyzes latency from three perspectives: total time composition, key factors causing delay, and engineering optimization strategies.\n\nThe total latency of a packet is the sum of four core time segments: UART transmission time (T_uart_tx / T_uart_rx), packet-assembly delay (T_pack), time on air (T_air), and UART reception time (T_uart_rx). The four contributing factors leading to high communication latency are improper UART baud rate and packing timeout settings, air data rate set too low, channel conflicts and blind retransmission, and deep sleep of nodes and wake-up preamble overhead.\n\nOptimization strategies include optimizing the UART link by increasing baud rate, using fixed-length packets, fine-tuning the air data rate with the link budget, avoiding air-time congestion through time-division scheduling and protocol lightweighting, and reducing wake-up preamble overhead using Wake On Radio (WOR) mechanisms. Balancing low latency with ultra-long range and ultra-low power is challenging due to physical limitations, but by measuring segment latency and implementing these strategies, communication latency can be minimized to meet system service requirements.",
  "summary": "The answer: In industrial automation, security alarm and remote telemetry projects, many engineers face delayed data transmission — after the system sends a control command, the receiver may take hundreds of milliseconds or even seconds to respond. Wireless transparent-transmission modules (such as EBYTE's E22 series based on the Semtech SX1262/SX1268 architecture, FSK/GFSK modules, etc.) contain…",
  "key_points": [],
  "editors_take": null,
  "illustration": null,
  "coverage": {
    "outlets": 1,
    "also_reported_by": []
  },
  "ai_generated": true,
  "disclaimer": "Summaries, key points and the editor’s take are written by software from other outlets’ reporting and may contain errors — always check the linked original."
}