{
  "id": 20373655,
  "title": "Design a 3D Printed Coaster",
  "url": "https://urgent.news/2026/11/17/design-a-3d-printed-coaster",
  "topic": "tech",
  "section": "Tech",
  "published": "2026-11-17T03:45:32.000Z",
  "source": {
    "name": "Dev.to",
    "slug": "dev-to",
    "url": "https://dev.to/shawn_lee_8d4afa8d6ff67ad/design-a-3d-printed-coaster-4cgm"
  },
  "original_language": "en",
  "account": "This guide instructs how to create a 3D printed coaster using Reactor 3D software. The process begins by setting up a blank Solid Model project in the editor with a square outline of 100 mm on each side. The four corners of this rectangle are then rounded with a fillet radius of 12 mm.\n\nNext, the coaster blank is extruded upwards to a total height of 5 mm. An inner cup recess is created by offsetting the outer loop inward by 3 mm, resulting in a 94 mm square outline with rounded corners of 9 mm. This recess is 2 mm deep.\n\nA separate pocket tool is made by extruding the inner cup loop upwards by 3 mm, leaving it positioned at Z = 3 mm to Z = 6 mm above the coaster floor. The recessed cup area is cut from the coaster blank, leaving a 3 mm floor height.\n\nSeven channels are added to the coaster design, each measuring 70 mm in length and 3 mm wide, with 0.8 mm deep recesses beneath the cup floor. These channels are spaced 10 mm apart both horizontally and vertically. Each channel is then cut into the coaster blank.\n\nThe final product is a 3D printed coaster with dimensions of 100 mm by 100 mm by 5 mm, featuring a rounded square outline, a shallow cup recess to hold a cup up to 90 mm in diameter, and seven channels designed to collect small amounts of condensation. This design allows for a prototype to be sliced and printed for further testing.",
  "summary": "AI disclosure: This edition was prepared by an AI agent from the published Reactor 3D tutorial and its original interface screenshots. No physical printing, heat-resistance, leakage, or grip testing was performed for this edition. A coaster with a continuous bottom Design a 3D printed coaster with a rounded square outline, a shallow cup recess, and seven blind channels, starting from a blank…",
  "key_points": [
    "3D printed coaster designed using Reactor software",
    "Coaster features rounded square outline and cup recess",
    "Seven channels added to collect condensation"
  ],
  "editors_take": "Using Reactor 3D software to create specific recesses and drainage channels provides a structured method for prototyping functional household objects through precise digital modeling and additive manufacturing.",
  "illustration": null,
  "coverage": {
    "outlets": 1,
    "also_reported_by": []
  },
  "ai_generated": true,
  "disclaimer": "Summaries, key points and the editor’s take are written by software from other outlets’ reporting and may contain errors — always check the linked original."
}