{
  "id": 13484431,
  "title": "How to Read a Circuit Board: What All Those Little Markings Mean",
  "url": "https://urgent.news/2026/10/10/how-to-read-a-circuit-board-what-all-those-little-markings-mean",
  "topic": "tech",
  "section": "Tech",
  "published": "2026-10-10T17:59:02.000Z",
  "source": {
    "name": "Dev.to",
    "slug": "dev-to",
    "url": "https://dev.to/dibyaprakash_pradhan/how-to-read-a-circuit-board-what-all-those-little-markings-mean-3cmh"
  },
  "original_language": "en",
  "account": "PCB markings provide crucial information for repairing, modifying or reverse-engineering electronic boards. Every component has a label indicating its type and position, alongside details about the board itself. These labels follow a common convention: letters designate the part's type, numbers assign its position, and symbols indicate key features. Reference designators appear in schematics and bill of materials, linking schematic symbols to actual component values. Designators include letters for part types, numbers for positions, and symbols for specific features, all following a standardized format. For instance, resistors are marked with letters like R, capacitors with C, and integrated circuits with U or IC. The position of a component is determined by pin 1, which can be identified using a dot, notch, or cut corner on chips, or a square pad for through-hole parts. Diodes, electrolytic capacitors, and tantalum capacitors each have distinctive markings to indicate polarity and orientation. Date codes, UL flammability ratings, fiducial markers for automated assembly, and alphanumeric order numbers are also common. When examining an unfamiliar board, starting at connectors and power components can provide valuable context. Test points facilitate probe access to critical circuits, and burned components retain their reference designator for identification. By understanding these markings, one can accurately trace and interpret the board's design and functionality.",
  "summary": "\"What do the PCB markings mean?\" is, by a wide margin, the most-viewed PCB question I could find on Electrical Engineering Stack Exchange. That makes sense. Every board you'll ever repair, modify or reverse-engineer is covered in small white letters and symbols, and nobody explains them because the people who know them learned them by osmosis. There are really only three kinds of marking: what a…",
  "key_points": [],
  "editors_take": null,
  "illustration": null,
  "coverage": {
    "outlets": 1,
    "also_reported_by": []
  },
  "ai_generated": true,
  "disclaimer": "Summaries, key points and the editor’s take are written by software from other outlets’ reporting and may contain errors — always check the linked original."
}